Noise Figure Meters
Location:
Undergraduate Lab.Inv #
DESCRIPTION
The 8970B Noise Figure Meter provides easy, accurate measurements. Automatic second-stage
correction makes accurate noise figure readings possible even for low-gain
devices.
Features:
Setup Guide: 8970B Operating Manual 2001-12-01 20.711 MB
User's Guide: 8970B Brochure 2001-05-01 2.697 MB
Quick Reference Guide: 8970B Quick Reference Guide 2001-05-01 0.153 MB
Service Guide: 8970B Service Guide 2001-12-01 0.365 MB
HP 8971B ( 10MHz
to 18GHz)
Location: Undergraduate Lab.Inv #
The
8971C Noise Figure Test Set allows the 8970B Noise Figure Meter (not included)
to make noise figure measurements over an extended frequency range.
Careful design and high-performance components, including a stable YIG filter,
allow broadband single-sideband measurements from 10MHz to 26.5GHz with a
single calibration and sweep. A low-noise preamplifier built into the noise
figure test set lowers the second-stage noise figure, thereby reducing a major
source of measurement uncertainty. Measurement modes in the 8970B allow for
double down-conversion using the 8971C as the second downconverter.
HP 8974A (
10MHz to 6.7GHz)
Location: Graduate Lab.Inv
#
Setup Guide: N8974A Setup Guide 2001-12-01 0.92 MB
User's Guide: N8974A User's Guide 2001-05-01 4.48 MB
Quick Reference Guide: N8974A Quick Reference Guide 2001-05-01 1.30 MB
Service Guide: N8974A Service Guide 2001-12-01 7.07 MB
Calibration Guide: N8974A Calibration Guide 2004-11-01 2.81 MB
Programmer's Reference: N8974A Programmer's Reference 2001-05-01 3.32 MB
The Agilent N8974A is a high performance noise figure analyzer
designed to make fast, accurate and repeatable noise figure measurement. With
the N8974A ease of use features, you can set up complex measurements simply and
easily giving you repeatable and reliable results you can trust. The N8974A offers
simultaneous noise figure and gain measurements with the ability to view, print
and save the data/display in multiple formats. The N8974A also has the ability
to characterize amplifiers and frequency translating devices, including LO
control over dedicated 2nd GPIB Features: • Frequency range 10 MHz to 6.5 GHz
in a one box solution • APC 3.5 (m) connector as standard • SNS series noise
source compatibility:
HP 8975A (
10MHz to 26.5GHz)
Location: Graduate Lab.Inv
#
Setup Guide: N8975A Setup Guide 2001-12-01 0.92 MB
User's Guide: N8975A User's Guide 2001-05-01 4.48 MB
Quick Reference Guide: N8975A Quick Reference Guide 2001-05-01 1.30 MB
Service Guide: N8975A Service Guide 2001-12-01 7.07 MB
Calibration Guide: N8975A Calibration Guide 2004-11-01 2.81 MB
Programmer's Reference: N8975A Programmer's Reference 2001-05-01 3.32 MB
The Agilent N8975A is a high performance noise figure analyzer designed to make fast, accurate and repeatable noise figure measurement. With the N8975A ease of use features, you can set up complex measurements simply and easily giving you repeatable and reliable results you can trust. The N8975A offers simultaneous noise figure and gain measurements with the ability to view, print and save the data/display in multiple formats. The N8975A also has the ability to characterize amplifiers and frequency translating devices, including LO control over dedicated 2nd GPIB Features: • Frequency range 10 MHz to 26.5 GHz in a one box solution • APC 3.5 (m) connector as standard • SNS series noise source compatibility:
The SNS series N4002A noise
source was designed to measure DUT noise figures reliable and accurately up to
30 dB from 10 MHz to 26.5 GHz. This noise source comes with an APC 3.5
connector as standard. Features: • Electronic storage of Excess Noise Ratio
(ENR) calibration data decreases the opportunity for user error. • Automatic
download of ENR data to the NFA speeds overall set-up time. • Temperature
compensation improves measurement accuracy leading to tighter specification of
device performance.
November 3, 2007